What Happens If a Street Light Falls on Your Car?

The bottom of the street light is corrosive very bad, it fell on top of the car I just buy for my son

What Happens If a Street Light Falls on Your Car? 1

1. How do I get the street light outside my house fixed?

If you do not get some type of response, take up a petition and have everyone on your street to sign it.When the next city hall/town meeting is held, take the petition there and present it to them. Good Luck!

2. Cree Lighting announces striking street-light luminaire

We keep hearing that LEDs free lighting manufacturers to adopt all new form in products, and Cree certainly went that route with the new Aeroblades family of luminaires, developed in partnership with lighting designer Speirs Major. The visually-striking design is also functional in terms of good thermal properties, support for different light-distribution patterns, and modularity for different lumen-output options. We are challenging traditional fixture design," said Christopher Ruud, Cree Lighting vice president and general manager. "Aeroblades can only be an LED-based fixture." "While everybody else was creating standard shoeboxes and other conventional designs, we were approached with a revolutionary technology that allowed us to throw out all preconceptions of how urban luminaires should appear," said Keith Bradshaw, director, Speirs Major. "The result is the Aeroblades luminaire, designed for the best LED performance and the form followed." To control the beam pattern, the luminaire design relies on the total internal reflection (TIR) lens optics called NanoOptic that Ruud Lighting developed for the BetaLED brand prior to being acquired by Cree. Each of the blades has 10 LEDs, and each has a NanoOptic. The design can support more than 20 optical distribution or beam patterns. The Aeroblades concept can support configurations with two, four, or six blades. Cree will offer more than 300 combinations. The luminaire can be mounted in a traditional manner for street and area lighting, or according to Ruud with the blades sideways and mounted on a wall for some security applications. The blade design was meant to add aesthetic value, but it also adds thermal mass that helps cool the LEDs. Ruud says that the cooling enables Cree to drive the LEDs in Aerobaldes with 1A of current, whereas a similar optical module used in the existing LEDway SLM luminaire can only be driven at 750 mA. The option of a higher drive current means that Cree can offer a range of lumen-output packages based both on the number of blades in a luminaire and the specified drive current. Higher current may impact the life of the fixture to some extent. But as Cree explained in a recent LEDs Magazine feature article, the latest LEDs can reliably tolerate the high current and provide access to what has been unused lumen capacity. The new design also introduces some changes in how the driver is implemented in a pole-mounted light. The blades do not afford room for a typical driver. Cree will offer versions designed for the driver to be mounted in the base of the pole. Ruud said that putting a driver in the pole base is common in many European installations, and offers the option of servicing the driver without a bucket truck. For traditional installations that would normally locate the driver in the luminaire, Cree will supply drivers that mount in the extension arm that connects the luminaire to the pole. Ruud said Cree expects to sell large volumes of both versions.

What Happens If a Street Light Falls on Your Car? 2

3. everytime i drive a street light goes out is in some kind of energy i have? just a randome light?

Your headlights are pointed up too high

4. LED Pole Lights Retrofit Guidelines for HID Replacement Solutions - Chiuer

Are you looking for a simple LED pole lights retrofit guidelines if your HID bulbs is not dead and you want to shift to LED ? Well, you board the right place, we offer our three universal lighting retrofit / llighting maintanance solutions and you will get some idea on how to retrofit your current pole lighting fixtures LED pole lights retrofit kits is so wildly used in North America like parking lot, public or private sport field, school complex,church, shopping mall,car dealership, roadway lighting etc. Because it saves as much as 75% energy in contrast with HID known as metal halide, high pressure sodium and mercury vapor lamps. Many property owners are seeking for the right LED bulb replacement but has no simple LED pole lights retrofit guidelines out there Or just hanging on before the a little higher cost of LED as they even have no idea that DLC standard or DLC premium listed LED pole lights retrofit including LED retrofit kits, LED retrofit lamps and LED corn bulb lamps can apply for the incentives or rebate from the local power companies. For outdoor LED pole lights bulb replacement, there are so many options to choose in the market. You might be hard to tell which one can suit your need. Today i am gonna to give you some instructions as your decision-making guide to make purchase of the right LED pole lights retrofit if you want to keep the original fixture to save some money for installation. There are several questions you need to consider before make purchase: Q1: How many lumens or footcandle you need for the LED pole lights retrofit? A1: a. For any end customer who do not have much sense of lumens(=efficacy*watt) of foot candle(=lumens/ft), Here is a simple guide for the equivalency of LED and HID(metal halide, high pressure sodium and mercury vapor) I emphasize lumens, not wattage as the dominant factor to consider, as the higher efficacy the led retrofit is, the lower the wattage to produce identical lumens. therefore you can see a higher lumen efficacy 100W bulbs consumes less power and save you more money compared with 120W bulbs here, In other words, if comsuming the same electricity, the 100W can lit longer than 120W. What is more, here is some helpful information from Arapahoe County goverment about what makes a good outdoor lighting you might need to learn also. b. For wholesaler,distributor, electricians, lighting consultants or contractors, you might use footcandle more commonly as messurement to see if a recommended LED retrofit can meet illumination requirement of your specific pole lights retrofit project, since there are different footcandle level requirement for different job site. Therefore, you need to ask for the photometric report or IES file from the supplier. If possible, a Dialux simulation illumination report is neccessary to be conducted to see the estimate footcandle level to show your customer and convince them if your proposal can really reach their lighting level standard, then you get your business. Q2: After knowing how many watt you need, then which kind of LED pole lights retrofit suits best. A: Here are some factors you need to take into account: a. Retrofit kit/lamp size and dimensions if it is can be put into the old fixture b. Beam angle. if it is suitable to use 120deg. or 360deg. and achieve the energy saving purpose. c. Mounting options: do you need edison base screw in or other mounting bracket to hold onto the old fixtures. Below are some LED pole lights retrofit solutions we have for different lighting applications, here we will have a brief introduction and list their pros and cons for your reference. Wattage available from 45W-480W, 100-277VAC version and 200-480VAC version; Various application: shoebox, wall pack, floodlight,canopy light and street light etc. or any situation that spread light downward Limited application: for 400W HID replacement in wall pack, shoebox, canopy light,street light etc. that require downward lightbeam. Not suitable for downward lighting, as there might be lots of lumen loss of one side of corn during reflection back and forth. Hopefully, these led pole lights retrofit guidelines is helpful for you to to find the best led pole lights retrofit. Therefore, if you still have any questions on how to select the right LED pole lights retrofit solutions or if you have better LED pole lights retrofit guidelines, you can leave us message online, we will respond you within 24hrs.

street light related articles
The Correct Manner to Take Off, Going Up Hill in a Manual, From a Street Light?
How to Choose LED Street Light Head? - Wenzhou Walton Electrical Co., Ltd.
How Many Days of Sun Light Does It Take to Power One Street Light?
I Have to Feed Single Phase 100 KW Street Light Load by Using 3 Phase Genset.?
A Street Light Is at the Top of a 15 Ft Tall Pole. a Woman 6 Ft Tall Walks Away From the Pole with a
you might like
Outdoor Street Lights 25 Years Bulk Buy 25 Years LumusSolem
Black Outdoor Solar Street Lights LumusSolem Brand
Die Cast Aluminum + Tempered Glass Outdoor Street Lights Die Cast Aluminum + Tempered Glass LumusSolem
Outdoor Street Lights Guangzhou Port/ Zhongshan Port/ Shenzhen Port by LumusSolem
10-15 Days Outdoor Street Lights LumusSolem Brand Company

Xingshen Technology Co., Ltd

Our mission to customers:
Environmental Protection, Intelligent Manufacturing.
no data
Contact Us

If you have any questions, please contact us.


Contact Person: Dora

Mobile: +86 138 7381 4717

Add: Dongcheng Building, Lanzhu East Road, Pingshan District, Shenzhen, Guangdong

Copyright © 2021 LumusSolem All Rights Reserved |Sitemap
chat online
contact customer service