Лучший глобальный ведущий производитель солнечного света & Поставщик солнечных уличных фонарей и солнечных прожектора.

Информационный центр

How to build a solar lighting system?

2022-01-05 13:49:01

There was light at the beginning of time. For millions of years, that light was the only source of illumination available. Then we discovered how to harness the force of fire to create light at night. This gave the means to use flames and candles to remain up beyond the sun's setting.

Our ability to create a wide range of goods increased dramatically throughout the Industrial Revolution. We installed electricity in our homes, businesses, and numerous outdoor locations to power lights, appliances, and various other purposes.

Although we still utilize much of this technology today, rural regions and communities searching for a solution due to the shortage of electricity in their area or their efforts to assist with current global warming concerns are turning to renewable energy sources for various uses such as power generation. Aside from that, off-grid solar lighting systems are becoming more popular since they may give a green solution for various outdoor lighting applications.

How to make a solar lightening system?

In most cases, installing a solar powered street lights are not very difficult. Much is dependent on the kind of light—for the most part, a solar lighting system will be used for outdoor lighting fixtures. Solar lighting kits are available for purchase, but you may also assemble the components yourself. The essential thing is to get a solar panel capable of supplying adequate electricity to the solar lighting system.

Step 1: Install a Solar Panel

The main drawback of a solar lighting system is that most solar panels do not provide significant electrical power. To create a financially feasible system, you must use the most significant solar panel you can buy. This is true not just in terms of scale but also in terms of substance. It must contain a sufficient amount of silicon.

The solar panel, or photovoltaic cell, as it is more formally called, turns sunlight into direct current energy, which is used to power appliances. The greater the efficiency with which the solar panel converts sunlight, the more power you will have available for your solar lighting system.

Step 2 - Putting the Panel Together

The solar panel for the best solar street lights should be positioned on the roof to ensure that it receives as much sunshine as possible throughout the day. Depending on your preference, it may either be laid flat on the roof or inclined upward to catch more sunlight.

Putting in the additional effort to guarantee that your solar panel gets the most significant amount of sunlight is a worthwhile investment since you will be able to generate more power for your solar lighting system as a result.

Step 3: Connecting the wires

It is necessary to connect cabling from the solar panel to the battery to complete the installation. DC, or direct current, power is generated by the cell, and the current flowing through the battery is likewise DC in nature.

The battery should be located in an easily accessible location for the solar lighting system. If feasible, run the wiring through the house rather than outside so that it is not exposed to the weather. Because you'll have to go through the roof or wall and run the wire within the walls, this will add to the amount of work you have to do.


Step 4 - Adding a Battery


The battery, which is simply a storage device, will be connected to the electrical system. Battery: The battery stores the power created throughout the day by the sun on the solar cell and stored in the battery. When the solar lighting system is turned on, it reduces the battery's energy supply capacity. The battery will only be recharged when sunlight is shining on the solar panel attached to the vehicle.


Step 5- Lighting


All of the appliances in your home run on alternating current, sometimes known as AC. DC is used for outdoor lighting. A solar lighting system that can be used inside the home will need the installation of an inverter that can convert direct current to alternating current and the addition of electricity to the house's electrical grid (it can go straight in via the inverter, bypassing the battery).

Using low-wattage light bulbs will lower the energy used, allowing the electricity produced to last for a more extended period. You may connect the batteries directly to the lights to outdoor power lights; LED lights are a fantastic, contemporary alternative for low-wattage outdoor lights because of their low power consumption. One solar panel will not be able to provide enough energy to power domestic lighting in the home, but it will be able to power a number of outside lighting fixtures.



Energy savings, economic savings, and environmental considerations are all factors that contribute to the utilization of outdoor solar street lights. These systems are called grid-free or stand-alone since they produce all of their power at the location where they are installed. There is no reliance on grid electricity, and there are no moving components to worry about failing.

One significant advantage of these systems is that they reduce the expenses associated with installing underground wiring. To save time and money, you may drop a pole and put everything in a single spot rather than bringing electricity to a site and lowering meters, trenching the power out to all the different project sites, paying a monthly energy bill, renting the poles, and fixtures, and so on. There are no electricity costs associated with the devices, and the only maintenance required is a battery replacement every few years or so, depending on the system.

In addition to modest landscape and pathway lighting, residential installations, large-scale projects for industrial sites, parks and recreation, new building, and retrofitting existing facilities are all possible with this form of solar lighting.

Off-grid solar lighting systems provide the end-user with light where and when they need it the most, for as long as they need the system to operate. Aside from that, custom-designed systems provide a bit more flexibility than systems purchased from large box shops or internet sellers.

recommended for you
нет данных

Xingshen технологии Лтд

Наша миссия к клиентам:
Охрана окружающей среды, Интеллектуальное производство.
нет данных
Свяжитесь с нами

Если у вас есть какие-либо вопросы, пожалуйста, свяжитесь с нами.


Контактное лицо: Dora

Мобильный телефон: 86 138 7381 4717

Добавить: Dongcheng Building, Lanzhu East Road, район Пиншань, Шэньчжэнь, Гуандун

Авторское право©2022 LumusSolem Все права защищены | Sitemap
онлайн чат
contact customer service